Flexible bell housing with oil-air cooler

Compact HYDAC design and inexpensive solution

• Bell housing in accordance with VDMA 24561 Form C
• Unproblematic replacement of the forms A, B and C with one another possible in accordance with VDMA 24561
• Can be supplied for almost all hydraulic pumps
• Processing of both flange-mounting sides finished
• Bell housing with damping and cooling element (air-oil cooler)
• Fan wheel (mounted on the motor shaft) included in the scope of delivery
• For 2-pole, 4-pole, 6-pole IEC standard motors (1000–3000 rpm)
• Design B5, B35, V1, V15
• Mineral oil in accordance with DIN 51524, other media upon request
• With optional bell support foot bracket
• Horizontal or vertical installation possible

Cooling element:

• Supply and discharge with G3/4", gasket-sealing
• Max. 16 bar operating pressure
• Max. permitted oil temperature +100°C
• The maximum temperature difference between oil inlet and ambient temperature may not exceed 50°C

Delivery programme:

• Series 2001 for motor size 80 (0.55–0.75 kW with 1500 rpm)
• Series 200 for motor size 90S – 90L (1.1–1.5 kW with 1500 rpm)
• Series 250 for motor size 100L – 112M (2.2 – 4 kW with 1500 rpm)
• Series 300 for motor size 132S – 132M (5.5 – 7.5 kW with 1500 rpm)
• Series 350 for motor size 160M – 160L (11 – 15 kW with 1500 rpm)
• Series 3501 for motor size 180M – 180L (18.5 – 22 kW with 1500 rpm)